Labocosmetica VERITAS – Panel & Surface Prep
VERITAS is an indispensable chemical swirl verifier and degreaser designed for use before applying any ceramic coating or sealant. Unlike standard IPA (Isopropyl Alcohol) solutions that evaporate too quickly to dissolve heavy oils, VERITAS thoroughly removes all types of polishing oils and paraffin. This ensures that coating molecules can bond perfectly to the surface, guaranteeing maximum durability and performance.
Why Choose VERITAS?
-
Deep Degreasing: Completely removes paraffin and new-generation synthetic polishing oils that other prep sprays miss.
-
Anti-Static Effect: Repels dust immediately after use, allowing you to apply coatings in a cleaner environment.
-
Coating "Life Saver": Can be used to rework halos or high spots within the first hour of coating application without stripping the protection.
-
Summer Optimized: Specifically developed with a slower evaporation rate than IPA, making it easier to use in hot weather.
-
Health Check Tool: Acts as a diagnostic spray to identify if a coating is truly failing or simply clogged by shampoo surfactants.
Key Benefits
-
Highlights underlying paint imperfections without "whitening" or drying out the finish.
-
Ensures a chemically pure surface for superior nano-treatment adhesion.
-
Versatile formula can be used pure for heavy stripping or diluted for inspection.
-
Avoids the "immediate dust attraction" common with traditional alcohol wipes.
-
Safe and effective for both professional detailers and enthusiasts.
What Can It Be Used On?
-
Paintwork and Clear Coats
-
Glass (as a deep degreaser)
-
Exterior Plastics and Trim
-
Wheels and Metals
-
Cured Ceramic Coatings (for health checks)
Dilution Guide
-
Removing Old Protection / Reworking Coating Errors: Use Pure
-
Spot Test Inspection: 1:1
-
Post-Polishing Inspection (Standard Check): 1:3 to 1:5
How to Use
-
If Using Pure: Spray VERITAS onto a short-pile microfibre cloth (do not spray directly on the bodywork). Pass the cloth over the area with linear movements and no pressure, then buff dry.
-
If Using Diluted: Spray directly onto the surface and spread with a microfibre cloth, then finish with the dry side of the towel.
-
Coating Health Check: After washing the car, while the surface is still wet, spray VERITAS (diluted) from a distance of 60cm. Rinse with water; if the beading returns, the coating was simply clogged by surfactants.
-
Correcting High Spots: During the first hour after coating, use a microsuede cloth soaked in VERITAS to gently smooth out any visible halos.
Pairs perfectly with the Labocosmetica range of coatings and sealants for a perfect bond.
FAQ
Why is VERITAS better than standard IPA? IPA evaporates almost instantly, often leaving behind some of the oils it was meant to dissolve. VERITAS stays active longer to ensure those oils are fully emulsified and removed, while also providing an antistatic barrier against dust.
Will it strip my wax? Yes. When used pure, VERITAS is designed to strip existing waxes and oils to leave a bare, "naked" surface ready for new protection.
Is it safe on plastics? Yes, it is much safer than pure alcohol, but we always recommend a quick test on a small area and avoiding long dwell times on sensitive unpainted trims.
Why Buy From Clean and Shiny?
-
Official Labocosmetica Stockist
-
Fast UK delivery
-
Expert product advice
Available Sizes: 100ml, 1 Litre & 4.5 Litre