Labocosmetica FIERO – High-Gloss Water-Based Primer
FIERO is an innovative and refined water-based finishing primer designed to create the perfect surface for nano-ceramic coatings. Unlike traditional primers, FIERO contains no waxes, resins, or silicones; it does not mask defects but eliminates them, leaving a pure, deep gloss. Featuring S.A.M. (Self Assembled Monolayer) technology, it ensures a permanent chemical bond between the surface and your chosen protection.
Why Choose FIERO?
-
S.A.M. Technology: Guarantees a strong, lasting link between the paint and ceramic coatings or sealants like CUPIDO.
-
No Wait Time: Unlike resin-based primers that require 6–12 hours to cure, FIERO allows for immediate coating application after polishing.
-
Adaptive Abrasive Technology: Synthesized abrasives that adapt to the surface, providing a perfect finish on both soft, "sticky" paints and hard ceramic clears.
-
True Finish: Contains no fillers or waxes; the gloss you see is the real finish of the paint. It is fully IPA-resistant.
-
VOC Free: The entire Labocosmetica polish range is odourless and free of volatile organic compounds for a safer working environment.
Key Benefits
-
Significantly shortens processing times by acting as a "super refiner" and primer in one.
-
Compatible with coatings that require UV lamp curing without any loss in gloss.
-
Exceptional performance on sensitive, "reflow" paint systems.
-
Can close the work in just two steps when paired with AUDACE compound on hard surfaces.
-
Eliminates the need for a final IPA wipe-down before coating in many scenarios.
What Can It Be Used On?
-
All Automotive Paint Systems (Hard, Soft, and Sticky)
-
Reflow-Sensitive Paintwork
-
Surfaces intended for Ceramic or Quartz Coatings
-
Surfaces intended for Sealants like CUPIDO
Dilution Guide
-
Ready to Use – FIERO is a precision polishing compound and primer designed to be used directly with a machine polisher.
How to Use
-
Preparation: Ensure the surface is clean, decontaminated, and dry.
-
With a Rotary Polisher: Spread the product homogeneously at a constant speed (approx. 4.5) on a 40x40cm section.
-
Technique: Work the product until the primer is depleted.
-
Pad Choice: Use a medium-soft (Yellow) or soft (Black) finishing pad for best results.
-
Coating: Once the section is finished, you can proceed directly to applying your ceramic coating or sealant.
Pairs perfectly with Labocosmetica AUDACE for a high-performance two-step correction.
FAQ
Do I need to wipe the surface with VERITAS after using FIERO? Because FIERO contains no oils, resins, or fillers, an IPA wipe is often unnecessary. However, if you wish to perform a final check, FIERO is fully compatible with VERITAS and will not lose its gloss or "sink" after a chemical wipe.
Can I use this by hand? While FIERO can be used by hand to improve gloss, it is a technical primer designed for machine use to achieve the heat and friction necessary for the Adaptive Abrasive Technology to perform at its peak.
What makes it "Adaptive"? The synthesized abrasives in FIERO change their behavior based on the pressure and speed of the machine and the resistance of the paint, allowing it to refine even the most difficult "sticky" paints that usually cause towels to drag.
Why Buy From Clean and Shiny?
-
Official Labocosmetica Stockist
-
Fast UK delivery
-
Expert product advice
Available Sizes: 250ml & 500ml