Labocosmetica PPF Surface Reset | Premium Paint Protection Film & Vinyl Prep Cleaner
Unlock flawless Paint Protection Film (PPF) installations with Labocosmetica PPF Surface Reset. Engineered specifically for professional detailers and installers, this ready-to-use (RTU) surface degreaser creates a chemically virgin foundation to eliminate film lifting, edge peeling, and unsightly air bubbles.
Say goodbye to traditional Isopropyl Alcohol (IPA). While aggressive alcohol preps evaporate too quickly and leave stubborn streaks, PPF Surface Reset utilises advanced, low-volatility plant-based solvents. This gives you a controlled drying time, allowing you to safely dissolve heavy adhesives, tar, waxes, and silicones without thermal shock or damaging delicate clear coats and sensitive plastics.
Key Features & Benefits
-
Maximum Adhesive Bond: Completely eliminates surfactants and residues to prevent film hydrolysis and edge lifting.
-
Superior to IPA Preps: Low-volatility plant-based solvents offer controlled evaporation, extended working times, and zero flash evaporation streaks.
-
Deep Degreasing Action: Quickly breaks down post-installation glues, road tar, silicones, and protective waxes.
-
Safe on Sensitive Clear Coats: Mild, plant-based chemistry protects delicate clear coats, gloss plastics, and trim while prepping.
-
Ready-to-Use Formula: No dilution required—just spray and wipe for instant surface decontamination.
How It Works: Advanced Chemical Surface Prep
Labocosmetica PPF Surface Reset represents the peak of detailing surface preparation. Unlike standard IPA cleaners that flash off instantly and leave behind redistributed oils, this advanced prep cleaner penetrates contaminant layers to break the chemical bond of glues and tar.
By ensuring zero residue is left behind, your film’s acrylic adhesive anchors instantly and uniformly across the panel, protecting your work against long-term moisture buildup and bubble formation.
Step-by-Step Application Guide
-
Prep: Do not dilute; PPF Surface Reset comes ready-to-use (RTU).
-
Apply: Spray evenly directly onto the panel or onto a high-quality short-pile microfiber towel.
-
Spread: Work in manageable sections (e.g., half a hood at a time) to ensure even coverage.
-
Dwell: Allow the formula to sit for a few seconds so the plant-based solvents can break down glues, tar, or wax.
-
Wipe: Before the product evaporates, buff the section clean using a second dry, clean microfiber towel.
-
Install: Proceed directly with your PPF or vinyl wrap installation on the freshly prepped, chemically virgin surface.
Recommended Applications
-
Pre-installation surface decontamination for PPF and vinyl wraps
-
Removing leftover adhesive residue after stripping old film or badges
-
Precision panel wiping and degreasing on delicate clear coats, trim, and plastics prior to ceramic coatings or wrapping