Meguiars DA Microfiber Finishing Pad 6” (2pcs) DMF6
Meguiars best-selling microfiber finishing pads! Designed to be used with Meguiars DA Microfiber Finishing Wax D301.
Backing Plate Size:
- These 6" (DMF6) Microfiber Finishing Pads fit 6" backing plates.
- If you have a 5" backing plate, you will need the 5" (DMF5) finishing pads.
- Use with a Dual Action (DA) machine polisher at 3800opm
- These 6.25" finishing pads have a velcro backing and attach to 6" / 150mm backing plates
- New microfiber disc technology refines surface to a high gloss finish
- Engineered foam interface for controlled conformability and optimal finishing
- Optimised for use with Meguiars DA Microfiber Finishing Wax D301
- Machine washable
Residue control and general use:
- After each pass of the panel you're working on, be sure to use a pad conditioning brush or compressed air (if you have access to it) to raise the microfiber strands again; this will ensure maximum performance from the pads.
- Once the pad you're using becomes noticeably 'clogged' with D301, wash the pad by hand or washing machine. The pads can be line dried, or spun on your machine polisher (in open-air, away from your vehicle) to speed up the drying process.
- After each pass of the panel you're working on, it's also advised to allow your dual action polisher to stand for around five minutes to allow the backing plate and machine to cool down. Microfiber systems do create slightly more heat than foam pads, so this step is necessary to prolong the life of the pads, backing plate and your machine.
Pack contents: 1x Meguiars DA Microfiber Finishing Pad 6" (2pcs)