Description
RENOVA is the first Traffic Film Remover Shampoo with an acidic pH on the market: a revolutionary product that opens a new segment, just as its predecessor PURIFICA did in its time.
It combines the cleaning effectiveness of a TFR pre-wash with the safety of a highly lubricated shampoo, offering an effect similar to LIMPIA but with an extra edge: the combined action of acid, which allows it to effectively remove traffic film and contaminants embedded in the film structure in a single step.
RENOVA is truly a 2-in-1: when used at dilutions between 1:5 and 1:50, it does not require an alkaline cleaner in the preliminary phase, making it ideal for washing and maintaining protected surfaces like PPF and wraps, even under the most critical conditions.
Its controlled acidic pH formula combines targeted cleaning power with maximum gentleness, using ethoxylated surfactants capable of penetrating deep into the microfissures of the material.
Unlike alkaline products or simple descales, RENOVA does not act aggressively but with chemical intelligence, selectively breaking down the most stubborn contaminants: oxidations, mineral residues, carbon compounds.
How to use:
Manual wash (dilution 1:50)
- Dilute 20 ml of product in 10 litres of water.
- Apply with a high-lubrication microfiber mitt.
- Work the surface in sections, proceeding from top to bottom.
- Rinse thoroughly.
- Dry with a clean, dry microfiber cloth.
Intensive localised treatment (dilution 1:10)
- Dilute 100 ml of product in 1 litre of water.
- Apply to areas contaminated with mineral residues or limescale.
- Let sit for a maximum of 60 seconds.
- Rinse immediately.
Maintenance shampoo for PPF (dilution 1:200)
- Dilute 5 ml of product in 1 litre of water (50 ml in 10 litres).
- Apply with a mitt or sponge on an already wet surface.
- Work evenly and rinse thoroughly.
Booster on microfiber mitt (dilution 1:5)
- Dilute 200 ml of product in 1 litre of water.
- Pour the solution directly onto the microfiber mitt.
- Wipe the mitt over the surface, section by section, to restore hydrophobicity and gloss.
- Do not let it dry, rinse immediately after application.
Degreasing spray for wheels or critical areas (dilution 1:5)
- Dilute 200 ml of product in 1 litre of water.
- Apply with a sprayer directly onto wheels or contaminated areas.
- Work with a soft-bristle brush.
- Rinse thoroughly.
- Check compatibility beforehand on delicate surfaces.
Bottle Size: 500ml