Labocosmetica PERFECTA 2.0 – High-Gloss Quick Detailer
PERFECTA 2.0 is a fast and effective quick detailer designed to enhance gloss, silkiness, and protection in one simple step. This refined formula quickly eliminates light dirt, water stains, and insect residue, leaving bodywork, glass, plastics, and chrome with a silky, smooth shine. It is the perfect solution for track-side touch-ups or maintaining a "just waxed" look with minimal effort.
Why Choose PERFECTA 2.0?
-
High Versatility: Works effectively on wet or dry surfaces.
-
Sunlight Safe: Advanced formula can be used in direct sunlight—ideal for outdoor events and summer shows.
-
Advanced Lubrication: Quickly lifts light surface contamination without scratching.
-
Silky Finish: Leaves the paint with an incredible tactile smoothness and deep reflection.
-
Hard Water Protection: Features a pH of 4.5 to help neutralize and prevent mineral spots during the drying phase.
Key Benefits
-
Eliminates water stains and smudges instantly.
-
Safe for all exterior surfaces: paint, gaskets, plastics, and chrome.
-
Acts as a highly effective drying aid to reduce the risk of marring.
-
Compatible with PERFECTA SiO2 (can be alternated during maintenance washes).
-
Concentrated formula means a little product goes a very long way.
What Can It Be Used On?
-
Paintwork (Gloss finishes)
-
Exterior Glass
-
Plastics and Rubber Trim
-
Chrome and Metal Plating
-
Ceramic Coatings, Waxes, and Sealants
Dilution Guide
-
Ready to Use – PERFECTA 2.0 is a concentrated formula; do not over-apply. A few sprays per panel are all that is required.
How to Use
As a Drying Aid (Wet Surface):
-
Spray PERFECTA 2.0 sparingly onto the wet panel.
-
Dry the panel and the product simultaneously using a high-quality drying towel (like the "SUPERDRYER").
-
The pH 4.5 formula will help eliminate any water spots forming during the process.
On Dry Surfaces:
-
Option 1: Spray onto a short-pile microfibre cloth and spread evenly over the panel. Buff to a high shine with a clean, long-pile microfibre.
-
Option 2: Spray directly onto the bodywork. Spread with a short-pile microfibre without pressing hard, then finish with a clean, dry, long-pile microfibre.
-
Note: For an average-sized car, use only 2 sprays for doors, 4 for the bonnet, and 6 for the roof.
Pairs perfectly with the Labocosmetica SUPERDRYER towel for a streak-free finish.
FAQ
Can I use PERFECTA 2.0 and PERFECTA SiO2 together? We recommend alternating them. Use PERFECTA 2.0 for one wash to prioritize gloss and slickness, and PERFECTA SiO2 the next to boost water repellency. They should not be layered directly on top of each other in the same session.
Why am I seeing streaks? Streaking is almost always caused by using too much product. Because PERFECTA 2.0 is highly concentrated, you only need a very light mist. If streaks occur, wipe over with a damp cloth and buff dry.
Is it safe for ceramic coatings? Absolutely. It acts as an excellent maintenance spray to refresh the gloss and "slickness" of any existing ceramic coating or sealant.
Why Buy From Clean and Shiny?
-
Official Labocosmetica Stockist
-
Fast UK delivery
-
Expert product advice
Available Sizes: 100ml, 500ml & 4.5 Litre