Koch Chemie P2.02 Micro Cut & Finish 1 Litre
Micro polishing compound with carnauba wax.
P2.02 Micro Cut & Finish 2.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks of P3000 grain size on all paint systems, including scratch-resistant finishes. Long-term sealing with high gloss and smoothness. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over.
P2.02 Micro Cut & Finish is economical, easy to polish and remove. Contains carnauba wax and non-fugitive silicones.
- Cut: 2.5
- Gloss: 9.5
Areas of use:
Paintwork of cars, commercial vehicles, motorcycles, etc.
Recommendations for use:
- For optimum results we recommend using a Koch Chemie orange anti-hologram pad and a dual-action or rotary machine polisher.
- Before use, moisten (prime) dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure thoroughly.
- Afterwards, polish with low pressure. Do not use pads used with this product for other products.
Shake before using. Protect from frost and excessive heat. Before using, check suitability and compatibility. Do not use on hot surfaces. Safety data sheet available on request for trade users.
Pack contents: 1x Koch Chemie P2.02 Micro Cut & Finish 1 Litre