Auto Finesse Iron Out Contaminate Remover 1 Litre
Auto Finesse Iron Out intensive iron-contaminate and fallout remover safely and effectively removes the tiny pieces of ferrous shrapnel that can embed itself into practically any surface. Iron Out targets and dissolves these iron particles before significant damage to your vehicle can occur.
Iron Out is an advanced, pH neutral, reactive gel formula that specifically targets only iron-based contamination.
It is suitable to use on all exterior surfaces, including:
- Aluminium, Magnesium and Stainless Steel
- Anodised finishes and Chrome
- Glass, Plastic... and even rubber
Iron Out also contains strong degreasing agents to help loosen road films, making it a powerful force in the decontamination process during your maintenance wash, or prior to claying and machine polishing.
Iron Out should be used as part of a multi-stage decontamination process, in between tar removal and claying. This process should be performed at least twice a year (before winter and after) on daily-driven vehicles before applying a car wax or paint sealant, or before any polishing work is performed.
If you are unsure of whether or not your car has ferrous contamination, spray Iron Out directly onto a yellow Foam Pad, and wipe the product on a small section of your vehicle’s paint or wheels. We can almost guarantee that you will immediately witness a chemical reaction, alerting you that you have iron fallout that needs to be removed.
This reaction is often referred to as ‘Bleeding’, as the solution turns blood red/purple where it contacts iron fallout, temporarily highlighting the contamination while it is dissolved.
- Spray onto wheels and/or paintwork;
- Allow to dwell;
- Iron Out will turn red/purple when it reacts with iron particles;
- Agitate with a detailing brush if needed;
- Rinse with fresh water through your hose or pressure washer.
Pack contents: 1x Auto Finesse Iron Out 1 Litre
We Also Recommend
Auto Finesse and Chemical Guys Safer Drying Kit